|
Product Details:
|
| Runing Voltage: | Regular 12KV | Runing Current: | Max 2000A |
|---|---|---|---|
| Breaking Current: | 20-25KA | Type: | Fixed |
| Standard: | GB,IEC,ISO | Manufactory: | KNKONG-ELECTRIC |
| High Light: | 20KA Breaking Switchgear Circuit Breaker,Indoor Switchgear Circuit Breaker,Fixed Type Switchgear Circuit Breaker |
||
20KA Breaking indoor type switchgear using vacuum circuit breaker fixed type VS1 series
Voltage: regular 12KV
Current: max 2000A
Breaking current: 20KA
Type: Fixed
Phase spacing: 205
Product overview
VS1 vacuum circuit breaker is used in 12kV, 24KV three-phase AC 50/60Hz indoor switchgear, and can be used for the protection and control of industrial and mining enterprises and substation equipment. The spring operating mechanism of VS1 series circuit breaker is a modular independent frame design, installed in KYN28-12 (24) centralized and fixed switch cabinets. The VS1 circuit breaker can be fixedly installed or used in combination with a trolley.
VS1-Series circuit breakers are Class M2.c2 and E2 model
VS1 series circuit breakers are maintenance-free and can be operated frequently. Compared with traditional circuit breaker products, the mechanical durability of VS1 circuit breaker has been improved from 10,000 ops to 20,000 ops, which is a huge improvement. The type test of capacitive current interruption shows a very low probability of re-arcing. VS1 has a long electrical life and free maintenance.
Technical Parameters
| No. | Item | Unit | Parameter | ||||||
| 1 | Rated voltage | KV | 12 | ||||||
| 2 | Rated frequency | Hz | 50/60 | ||||||
| 3 |
Rated insulation level |
1min power frequency withstand voltage(r. m. s) |
KV |
42(phase-to-phase, phase-to-earth) 48(across the isolating distance) |
|||||
| Lighting impulse withstand voltage (peak) |
75(phase-to-phase, phase-to-earth) 85(across the isolating distance) |
||||||||
|
4 |
Rated current |
A |
630 | 630 | 1250 | 1600 | |||
| 1250 | 1250 | 1600 | 2000 | ||||||
| 2000 | 2500 | ||||||||
| 2500 | 3150 | ||||||||
| 4000 | |||||||||
| 5 | Rated short-circuit breaking current |
KA |
20 | 25 | 31.5 | 40 | |||
| 6 | Rated short-time withstand current | 20 | 25 | 31.5 | 40 | ||||
| 7 | Rated short-circuit marking current | 50 | 63 | 80 | 100 | ||||
| 8 | Rated peak withstand current | 50 | 63 | 80 | 100 | ||||
| 9 | Rated duration of short-circuit | s | 4 | ||||||
| 10 | Rated operating sequence | O-0.3s-O/C-180s-O/C | |||||||
| 11 | Breaking times of rated short-circuit current | Times | 30/20 times(40KA) | ||||||
| 12 | Mechanical endurance | Ops | 20000 | ||||||
| 13 | Rated single capacitor bank breaking current |
A |
630 | ||||||
| 14 | Rated back-to-back capacitor bank breaking current | 400 | |||||||
| 15 | Double-earth fault breaking current | 27.4 | |||||||
| 16 | Allowable maximum contact erosion |
mm |
3 | ||||||
| 17 | Clearance between open contacts | 10±1 | |||||||
| 18 | Over stroke | 3.5±0.5 | |||||||
| 19 | Non-simultaneity of 3-phase opening and closing |
ms
|
≤2 | ||||||
| 20 | Bounce duration of contact closing | ≤2 | |||||||
| 21 | Average breaking speed (instant breaking 6mm) |
m/s
|
1.1±0.2 | ||||||
| 22 | Average making speed | 0.8±0.2 | |||||||
| 23 | Making time |
ms
|
≤100 | ||||||
| 24 | Breaking time | ≤50 | |||||||
|
25 |
Resistance of each phase main circuit |
μ Ω |
630A | ≤50 | |||||
| 1250A | ≤45 | ||||||||
| 1600A~2000A | ≤35 | ||||||||
| ≥2500A | ≤25 | ||||||||
| 26 | Contact breaking bounce amplitude | mm | ≤2 | ||||||
|
27 |
Rated operating voltage | Rated operating voltage(V)AC/DC |
V |
24* | 110 | 220 | |||
| Scope of normal operation voltage | Opening:65%-120% rated voltage, in case the voltage is lower than 30% rated voltage, opening operation is not allowed | ||||||||
| 28 | Rated voltage of energy storage motor | V | AC110/220,DC110/220 | ||||||
| 29 | Energy storage time | S | ≤15 | ||||||
Contact Person: Antonio
Tel: +8613607680651
