380V, 50/60 Hz
Modular design, easy assembly
Enclosure: Max. IP40
Send us your SLD (Single Line Drawing) or requirements, we design the switchgear plan for you
Used for power users such as power plants, substations, factories and mines, as AC 50-60Hz, rated working current up to 3150A in the power distribution system, as the power conversion, distribution and control of power, lighting and power distribution equipment.
The product has the characteristics of good dynamic and thermal stability, novel and reasonable structure, practical electrical scheme, strong serial usability, and high protection level. It can be used as an updated product.
1. The ambient temperature is not higher than +40℃ and not lower than -5℃.
2. When the product is installed and used, the altitude of the place of use should not exceed 2000M.
3. The relative humidity of the surrounding air is not more than 90% (+25℃).
4. The equipment should be installed in a place without severe vibration and impact, and in a place where the electrical components are not corroded.
5. The relative humidity of the surrounding air does not exceed 5% when the maximum temperature is 40 degrees, and a larger relative temperature is allowed at a lower temperature, which should be considered due to
Temperature changes may occasionally produce condensation effects
6. The equipment is installed in a place where there is no severe vibration and impact, and where the electrical components are not corroded
7. When the user has special requirements, it can be resolved through consultation with the manufacturer
1. The floor of the GGD AC low-voltage power distribution cabinet adopts the general floor form, and the frame is assembled by welding with 8MF cold-formed steel. The frame parts and special supporting parts are supplied by the designated steel manufacturer to ensure the floor of the cabinet. Precision and quality. The parts and components of the general cabinet are designed according to the principle of the module, and are equipped with 20-module mounting holes, which have a high universal coefficient. Can make the factory realize pre-production. This not only shortens the production cycle, but also improves work efficiency.
2. The GGD cabinet is designed with full consideration of the heat dissipation problem when the cabinet is running. There are different numbers of cooling slots on the upper and lower ends of the cabinet
When the electrical components in the cabinet heat up, the heat rises and is discharged through the upper slot, while the cold air is constantly replenished into the cabinet from the lower slot, so that the sealed cabinet forms a natural ventilation channel from bottom to top to reach the heat dissipation area. purpose.
3. According to the requirements of modern industrial product design, adopt the golden ratio method to design the cabinet shape and the division size of each part, so that the overall appearance is beautiful and fresh.
4. The door is connected to the frame with a hinged hinge for installation. Easy to disassemble. There is a mountain-shaped rubber-plastic strip at the folding edge of the door. When the door is closed, the embedded strip between the door and the frame has a certain compression stroke, which can prevent the door from directly colliding with the cabinet body and improve the protection level of the door.